Imagine craving a steaming cup of Joe bright and early in the morning, and bam! Your beloved Nespresso milk frother not working ruins your chance of having velvety smooth coffee.
How frustrating!
Even though you must wonder if it’s the Nespresso machines’ troubleshoot or your expertise in working the settings, most often than not, it’s the former.
And we’re here to tell you all that you need to know about the machine’s setbacks like not heating or spinning and how to fix them.
Nespresso Milk Frother Not Heating
If you notice that the heating element on your Nespresso machine is failing to heat the milk, here’s what you should do.
Before you break into a sweat, you can check to see where the problem lies and perhaps, with a bit of practice, eradicate it too.
Taking apart the Nespresso machine using a screwdriver should be easy. You should notice a heating pad with a few copper connectors. Usually, the fault lies on the surface of the heating pads.
If you see a particular burnt-out spot with an oxidized fusing link or two, then that’s where the issue has originated. But hey, you can fix the fuse!
Yay! Let’s take a gander at the steps which can reignite the heating mechanism in your Nespresso machine.
- First off, you need to cover the oxidized, burned spots with Kapton tape. Cut out the Kapton tape from over the rusted burned-out part. Make sure that there’s no excess adhesive left on its surface.
- Take a few drops of hydrofluoric acid in a dropper. Be extremely careful while working with this acid. Apply a few drops on the oxidized area and leave it on for a bit.
- You can soak up if you notice a bit of an overflow in the burnt-out area.
- Check if there’s any connectivity with a meter, and you can reapply the acid if you see that the connection is low ranged. Leave it on for another ten minutes or so, and you should notice the color changing.
- Take off the Kapton tape and utilize a tissue or cloth to remove any excess acid off the heating pad.
- Apply a layer of epoxy to the formerly affected area.
- Reassemble the Nespresso machine, and voila!
Now you can enjoy frothy, hot milk for your coffee with no fuss. On the contrary, if this seems rigorous to fix at home, don’t hesitate to take help from an expert or professional.
Nespresso Aeroccino Whisk Not Spinning
There could be a few good reasons for the whisk featured in the Nespresso machine to stop functioning. We will discuss a few troubleshoots below and ways to get rid of them.
Firstly, you must check for any residue or gunk formulation on the surface of the whisks, which could hamper its overall function. This works as a barrier and stops the whisk from spinning.
Here’s what you should do:
- Nudge the whisk lightly and check if the Nespresso Aeroccino whisk pops off. If it does, perhaps the whisk had come off loose. Push it back in place or check if the magnets have stopped conducting.
If the whisk still resists functioning, you can try cleaning the machine. Follow the below-mentioned steps:
- Rinse the inside of the machine with cold water and whisk too.
- Wipe out any remaining residue with a damp washcloth or non-abrasive sponge.
- Another way to expertise in cleaning these would be to wipe out the milk residues after each use.
Another benign reason for the milk frother thermal fuse or the whisk to malfunction could be when the jug or the whisk isn’t set and attached correctly.
- Ensure that the jug isn’t wiggly. Attach it correctly to the base of the machine. Make sure that the base is clean too.
- If you notice that the jug is placed correctly, you can go ahead and attach the whisk too.
Believe it or not, the quality of the milk that you’re using in this phase can not only affect the quality of your piping hot cup of coffee but can also barricade the Nespresso’s whisk from spinning.
- Make sure that you’re using standard semi or whole skimmed milk.
- The milk should be at a refrigerated temperature around four to six degrees celsius.
When it comes to putting or choosing the correct kind of milk, we cannot ever rule out that there may have been an overflow.
- The Nespresso milk frother comes with specific directions and indicator levels.
- When you pour the milk into the Nespresso milk frother, you must utilize an appropriate whisk.
- It is recommended that you refer to the milk level with the indicators inside.
- If you cross the directed indicator line, there will be an overflow inside the machine, rendering the whisk and overall mechanism useless.
You can also get an alert from the Nespresso machine itself as the red button goes off.
When you notice that the red button is blinking, you can be confident that there’s something wrong with the whisk, appliance, or the milk.
- As you fill-up the milk frother with milk, you must ensure that you have poured enough milk. While overflowing the machine is a plausible fault, not putting precisely as the device suggests is similarly a faulty application too. Ensure that you fill the frother up to at least one of the two indicator levels or top lines.
- Another answer with such aftermath could be when the whisk is completely missing from the milk frother. Don’t forget to check if the whisk is correctly placed and attached to the base too.
- Lastly, if the appliance gets too hot for use, the red button will start flickering. It would help if you did not use the milk frother when you notice that the machine overwhelmingly hot. Rinse the Nespresso milk frother under cold water and use it afterward.
Last but not least, when you notice that even after a remarkable amount of cleaning, scrubbing, and DIYs is coming to no particular use, you can switch up the specific parts of the milk frother.
Here is a complete diagnostic video on Nespresso Aeroccino for you.
I hope the above Nespresso Aeroccino troubleshooting video can solve your problem. I got two more models to talk about too.
Nespresso Lattissima Touch Not Pumping Milk
I know how strange it seems when it suddenly stops working. For your Lattissma Pro machine, this issue is not so uncommon.
I know a small trick that can solve the problem. But before that, you need to understand a little bit about the machine.
There are 5 pieces to the frothing head like frother to machine joint piece, foam selection dial, head unit, spout elbow, etc. Milk deposits or hard water deposits to these pieces cause the problem most of the time.
Yes, you may have the Nespresso descaling solution but sadly it can’t clean the hard water deposits. You need to use a CLR cleaner.
Soak all the 5 pieces in the CLR and use a syringe to flush CLR through these pieces. Now, let them sit in CLR for 15 minutes. Again, let those pieces sit in hot warm for 5 minutes.
Lastly, flush those pieces thoroughly with hot running water. Your Lattissma Pro machine should work again!
Nespresso Creatista Plus Troubleshooting
People face various issues with their Creatista Plus. Here are some common issues with relevant troubleshooting tips:
- If you notice water under your Creatista Plus, you are having a leakage problem. It mainly happens when the drip tray is full. Empty the tray if this is the case and make sure the tray is securely inserted.
- Sometimes, your coffee won’t be hot enough. If this is the issue, preheat the cup and descale your Creatista Plus when necessary.
- When the steam is very wet, you are mostly likely using highly filtered or distilled water. Try again using cold and potable water.
- Sometimes, the milk steam cycle stops working. Make sure the water tank is correctly positioned and filled with potable water. Lastly, make sure the steam tip is blockage-free.
- Lastly, if the buttons are not illuminated or you don’t see any steam or hot water at all, don’t forget to check the fuse, plug, and voltage.
The good news is that you don’t have to toss away the entire Breville Nespresso milk frother machine and your most anticipated investment in the hopes of having excellent, creamy, and foamy coffee. Heck, no!
To be even more specific, the market is filled with top-tier milk frother replacements that can extend the life term service of the Nespresso machines.
You can purchase any of the required spare parts by referring to their corresponding brands. In contrast, some brands release all-rounder replacements that can be compatible with multiple coffees and milk frothing machines.
These are incredibly simple to use and easier to replace and install. So, here’s your ultimate chance of getting back the most value out of this investment.
Conclusion
So, now that you know all the remedies and defaults when you notice the Nespresso milk frother not working, put your knowledge to use!
While regulating a coffee machine, you also need a comprehensive overlook on maintaining, cleaning, and dealing with troubleshoots.
It’s a part of the deal that will let you enjoy endless cups of Joe and extend the Nespresso’s machine’s lifespan.
About Author
