Maytag Centennial Washer Not Spinning or Draining: Reasons And Fix

Apparently, some households are struggling with this top load washing machine spin problems. It’s not just Maytag, it can happen to any renowned brand’s washer.

Seeing the Maytag Centennial washer not spinning or draining is frustrating. But most of the time, there is an easy fix for this. Very rarely, you may need to go all the way to solve the problem.

In this troubleshooting guide, I will tell you exactly what should you do to solve the spinning problem of your washer.

What To Do If Maytag Centennial Washer Won’t Spin?

Maytag Centennial washer not spinning

The first thing is to keep your head cool and have a deep breath. People don’t avoid this washer brand for such simple problems.

Also, don’t worry about the sopping wet clothes for now. Everything will work out great.

I will start from a very basic inspection (that’s where most people get the solution). Gradually, I will move to more difficult parts. Follow this troubleshooting guide and solve the spin problems:

  • Excessive Load

The extra load will cause your Maytag Centennial washer not to spin. You may have seen it before, jammed clothes can make any washer spinless. This is the most common cause of that particular problem.

This is why it happens…

Extra-large clothes will end up on one side of the drum and create such problems. There could be jammed clothing outside the drum too.

Remove some clothes from the drum or outside the drum and run the spin cycle again. If it does not solve the problem, check the next tips.

  • Broken Motor Coupling

It connects the motor and transmission and that’s how the washer drum gets the power to function. So, if it’s broken or failed somehow, the spin cycle of your washer won’t be working.

If the washer repeatedly goes through heavy loads, the motor coupling may fail prematurely and damaged permanently. If it’s damaged, you need to replace it.

  • Clogged Drain Hose

Maytag Centennial washer

If the drain hose is clogged, it won’t spin or rinse. To be sure, take off the drain hose from the back of the washer. Now, run water through the hose to make sure it’s not clogged.

This is a great time to check the drain of the washer too. Calcium build-up may clog the drain if you have hard water. Make sure nothing is caught in there.

  • Faulty Lid Switch

If the lid is open, your washer won’t spin your wet clothes to dry. So, it’s a good time to check the lid switch. It is there to prevent the washer from spinning in case of an open lid.

Inspect the lid switch carefully…

You should inspect the plastic tab on the lid (it triggers the lid switch when closed) and make sure there is no damage to the tab.

If no damage is there, you may have a problem with the lid switch itself.

Listen for a click sound when closing the lid. If you don’t hear the click sound, the lid switch is most probably broken and may need a professional to replace it.

  • Drive Belt Problems

If the drive belt is broken, damaged, or just loose, your Maytag washer won’t spin. This is something you should inspect when it spins but makes loud noise too.

You need to make sure the drive belt is on the pulley system. To do so, first, locate it. You can find it removing the back panel of your washer.

If the drive belt seems loose, just tighten it on the pulleys. But you must replace it if found damaged or broken.

  • Worn Out Clutch

Your washer can’t do any spinning if the clutch is worn out too. You see, the clutch assembly connects the inner tub and the transmission so that the tub can get up to the proper spin speed gradually.

It will prevent making any spin if it’s worn out. You can’t repair the worn-out clutch. You need to replace it completely.

  • Damaged Magnets On Rotor

The rotor creates a strong electromagnetic field interacting with the stator to rotate the tub. But if the magnets of the rotor are damaged, the washer won’t agitate or spin.

Like the worn-out clutch, you can’t fix the damaged magnets. So, after inspection, if it found damaged, you need to replace the rotor.

  • Defective Bearing System

The rear drum of the washer has spring(s) so that the inner tub can spin smoothly. So, if your Maytag Washer stops at spin cycle, this is where you should have a look too. More so, it will become very noisy due to the broken bearing.

So, you need to fix it FAST. You can buy the bearings separately but I would recommend buying the new drum and bearing altogether.

  • Worn-out Transmission

The washer transmission has its own components. When such components fail, the washing machine may not spin. It is very unlikely to happen, but yes, the transmission may become defective or worn-out over time.

You should only think about replacing the transmission after examining all other components. Also, make sure to take a professional opinion before making such a decision.

Frequently Asked Questions (FAQs)

What is the problem if the washing machine won’t spin?

If it’s not jammed with large clothes and the lid switch is functioning, maybe it has a clogged drainage hose problem. Your washer can’t spin unless the clothes have been completely drained of water.

Why is my washer stuck on lid lock?

The lid switch is pressed down by the lock striker. If the lock striker is out of alignment, you will face that problem. Sometimes, build-up from the detergent can block it from locking it too.

Where is the filter on a Maytag Centennial washer?

You can find it inside the agitator of the washer.

How do I fix my Maytag washer that won’t spin?

Most probably, the jammed clothes got one-sided of the drum and causing this issue. Remove some clothes and try to spin the cycle again.

Closing Thoughts

I believe you are no longer wondering why is my Maytag Centennial washer not spinning, are you?

If you are still having the same problem and none above the tips could solve the problem, it’s time to call a professional.

About Author

2 thoughts on “Maytag Centennial Washer Not Spinning or Draining: Reasons And Fix”

  1. The machine won’t spin the clothes in regular and heavy duty cycles. I have to wait, and then put it on the spin cycle and it spins the clothes dry. So it will spin them dry, it takes another step which makes ZERO sense to me. \

    Any solution would be welcome.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Scroll to Top