Maytag Bravos XL Washer Problems: Reasons With Troubleshooting Tips

Are you stuck with some Maytag Bravos XL washer problems? If yes, you’re not alone on this.

While the Maytag Bravos XL washer is pretty easy to use, looks great, and is highly efficient, it can efficiently run into some bad problems.

And this is because the washer is a machine with mechanical and electrical features that could develop mechanical and electrical issues, respectively.

In this article, you will learn everything you need to know about troubleshooting a Maytag Bravos XL washer. So please keep reading to have a look at those common problems and how to resolve them.

Common Issues With Maytag Bravos XL Washer

Maytag Bravos XL washer problems
  • It won’t turn on.
  • Start button not working.
  • Makes serious noise.
  • Leaking issue.

There are some obvious reasons why these problems occur and there are some easy fixes too. So, let’s talk about them in detail:

Maytag Bravos XL Washer Won’t Turn On

If your Maytag Bravos XL washer doesn’t turn on, then it could be because there’s a defective timer, a defective control, and display board, or an incoming power problem.

A low-quality power cord can be another reason your Maytag Bravos XL washer won’t turn on. Check out those reasons and solutions to fix the problem.

  • Lack of Continuity

Use a multimeter to check for continuity in your washer timer. Follow the washer instructional guide to check for continuity because it is different from the models.

If there are no signs of continuity, then you’ve got a defective timer, and it’s best to get a new one. If the continuity test gives a positive result, then jump into step 2.

  • Faulty Control Panel And Display Board

Check the connection of the control panel and display button. If power is getting to the control panel and display button but still not functioning, the control panel and display button could be faulty.

Some buttons may respond, and others won’t if a control panel and display board are faulty. All you have to do is replace the defective control panel and display board for the washer to power on.

  • Low-Quality Power Cord

A low-quality power cord will fail to give your washer power. Hence the washer would not power on. Make sure to use am original power cord or the one recommended by Maytag Bravos XL washer Manufacturers.

  • Defective Door Lock

A faulty door lock will make your washer not start. For security reasons, the Maytag Bravos XL washer is designed to start after the door is locked.

Use a multimeter to confirm the continuity of the washer’s door lock and replace a faulty door lock with a new one.

Maytag Bravos XL Washer Start Button Not Working

Maytag Bravos XL washer button problem

A thermal fuse, line fuse, or defective main control board will cause a washer start button not to work. Luckily, there’s the solution.

Here’s all you have to do to resolve a washer button not working problem.

  • Defective Main Control Board

Because the main control board controls every function in the washer, checking the main control board is the most logical thing to do.

Although the Maytag Bravos XL washer main control board has the least defective issues, still it’s safer to check it when having a washer button problem.

  • Faulty Thermal Fuse

In the Maytag Bravos XL washer, the thermal fuse is used for security. A blown thermal fuse won’t make the washer start button work.

So, make sure to check the thermal fuse for continuity. Replace the fuse if you detect a thermal fuse blown problem.

However, ensure that you’ve resolved issues that could cause a thermal fuse blown problem before replacing the thermal fuse.

  • Bad Line Fuse

A blown line fuse can cause the washer button to not start like the thermal fuse. Check the line fuse for continuity alongside other areas like the drain pump or wires.

If you detect a fault, it’s time to change the line fuse to solve the washer start button’s not working problem.

Maytag Bravos XL Washer Is Making Noise

When the Maytag Bravos XL washer makes a loud noise, it simply means there’s an issue with one or two engine parts.

A worn-out drive pulley is the most common cause of Maytag Bravos XL washer making noise problems.

Maytag Bravos makes noise
  • Cracked drive pulley

Check for a cracked or worn-out pulley and replace it with a new one. The drive pulley is located under the washing machine.

You will find it inside the motor.

  • Faulty Drive Belt

Continuous usage of the washer’s drive belt can cause the belt to crack or burn out and cause loud noise emitting from the machine. Confirm if the drive belt is cracked and replace it if you find any.

  • Motor Coupling Failure

Wear and tear can result in a motor coupling failure which eventually causes the washer to make a loud noise when in use. Change the broken motor coupling to stop the loud noise.

Maytag Bravos XL Washer Leaking Problem

Several factors can contribute to a water leaking problem in the Maytag Bravos XL washer.

Here are the troubleshooting steps to solve a water leaking problem.

  • Bad Tub Seal

With time, the washer tub seal can create a bearing failure and cause the washer to leak water. Replace the tub bearing and the tub seals to resolve the problem.

But note that you will have to disassemble most of the washer’s parts to replace the tub seal.

  • Defective Door Boot Seal

The door boot seal can also get faulty and cause a water leaking problem. Check for a torn door boot seal and replace it with a new one.

  • Faulty Drain Pump

Hmm…some people faced the draining problems with Maytag Centennial Washer too!

A drain pump and a drain hose can be another reason behind the water leaking problem. It could be damaged or cracked, causing water to leak from the back part and flow to your room.

To resolve this issue, fix the connection problem and replace the cracked drain pump or drain hose. Make sure to avoid pushing the drain hose against the wall after replacement.

It could cause the drain hose to become damaged or cracked.

Maytag Bravos XL Washer Reviews

I have made a list where I mentioned some least-preferred washer brands to avoid. Maytag was one of those brands because it’s a trusted one when it comes to washing machines.

The Maytag Bravos XL washer gives users a wonderful experience even on a friendly budget. The washer is easy to operate and efficient.

However, you must understand that the Maytag washer comes in different models. Each model has its unique features and thus its unique problems.

Don’t forget that the washer is a machine and can give funny technical or electrical problems. But do not panic when this happens because you can easily find your way around them using the detailed troubleshooting steps given above.

The trick is to know where to buy an original Maytag Bravos XL washer replacement part and know where these parts are located in the washer.

But here’s a warning; do not hesitate to get help if the problem gets complicated or if it will demand that you will disassemble most of the washer’s parts.

And I want you to watch this video to see its problems first.

Conclusion

The Maytag Bravos XL washer can last up to ten years if well maintained. The washer features first-class parts that are easy to removed, cleaned, and maintained.

It takes a little technical know-how and the right tools to troubleshoot Maytag Bravos XL washer problems.

The best part is that you will save money since you only have to pay for the replacement parts. Now, you can say goodbye to those annoying times when you have plenty of clothes to wash, and your washer doesn’t respond.

The troubleshooting process for the washer is efficient, and yes, it is safe.

4 thoughts on “Maytag Bravos XL Washer Problems: Reasons With Troubleshooting Tips”

  1. I absolutely loved my Bravos XL washer so much that I kept it after it stopped working. I’ve purchased a part for it but now discovering that it is not what it needs.
    I believe it will need a tub seal and bearing. I’m quite mechanically inclined but hesitant to take this on, and limited space where the washer is sitting. ugh.
    The washer leaked for a long time leaving a large rust circle spot underneath. It no longer wants to agitate and spin correctly.
    The washer lasted a good five years and I question whether or not it is worth the effort.

  2. my maytag bravo xl is 3 years old and i had a repair man out to look at it and he said it would cost more to fix than buy a new one.
    that is totally crazy that a MAYTAG washer doesn’t last 3 years. i bought what was supposed to be the top of the line and now it goes to the trash NOT HAPPY

  3. Bought the Maytag Bravo XL washer and dryer. Dryer went after 3 years and had to fix. Now the washer will not turn on. Was told that it costs more to fix than to replace. Will never buy Maytag again. Very disappointed.

  4. My bravo. Xl only 3 years old. Lid cracked at the hinge. Won’t close properly. 400 for a new lid and that doesn’t even include labor and service charge. Terrible cheaply made. They don’t make ‘em like they used to.

Leave a Comment

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Scroll to Top