Husqvarna Z248F Problems And Major Complaints Explained

With lawnmowers, the brand is just as important as durability. Husqvarna is one of the most dependable brands of lawnmowers on the market.

The Husqvarna Z248F is just one of the many models you can get from Husqvarna. That’s why it’s common to see users looking for answers to Husqvarna Z248F problems.

For all its quality, the Husqvarna brand still isn’t immune to some problems here and there. That is unsurprising.

However, how do you sort out these glitches and avoid them stalling your work?

Read on to find out.

Some Problems With Husqvarna Z248F Mower

Husqvarna Z248f problems

List of problems/complaiints you may encounter:

  • Having trouble to start the mower.
  • Hydraulic problems
  • Uneven cut occasionally
  • Tearing up lawn
  • And other problems

Let’s first start by saying even the greatest of pieces of equipment usually have a few glitches here and there. That’s just the way it is. There are no perfect mowers, and the Z248F is an excellent mower with its issues.

However, you will be glad to know that most issues aren’t that serious and are quite easy to solve.

  • Husqvarna Z248f won’t start

This problem is quite common and might result from several issues with the lawnmower. There are several reasons a Husqvarna Z248F engine would fail to start.

Chief among the reasons is a lack of adequate fuel in the tank or insufficient air getting to the engine.

Among the things that could cause the motor not to get enough fuel is a clogged fuel filter.

Check the fuel tank to see if it has enough clean fuel to power the engine. After that, check the filters for any clogs. Checking the air filter is relatively straightforward.

All you have to do is hold a light on one side and try to see if you can see the light from the other end. If you don’t, then it will mean the filter is clogged.

There is o way to repair a clogged or damaged filter, and you will have no other option but to replace it.

The engine might also not start if you haven’t engaged the choke. For cold starts, you need to engage the choke before you can start the engine.

The choke works by reducing the amount of air that enters the engine to assist in the burning of fuel.

You could also have issues starting your mower’s engine because the cylinder is too full of fuel. That happens whenever you warm start the engine with the choke on.

This causes a lot of the fuel from the fuel tank to flood the cylinder, leading the mower not to start.

Switching up the throttle will enable the fuel to leave the cylinder, then the mower’s engine will start.

  • Husqvarna Z248F hydraulic problems
Husqvarna Z248F hydraulic problems

The Husqvarna Z248F, like most other mowers, uses a hydraulic transmission to function. That means that oil under hydrostatic pressure is used to move the lawnmower.

Therefore, hydraulic problems will affect the mower and how it starts since no oil is transmitted to the engine for it to start the mower.

That could be because you didn’t purge the mower before starting it.

If your mower is new or you haven’t used it for some time, it would be best to purge it before using it.

Purging is simply removing any trapped air in the pump before using it. That should help you eliminate any hydrostatic transmission issues.

If any of the above problems come up again, get a professional to help you solve them.

If you can reach customer care at Husqvarna, they would also help you shed light on any other issues you face with the mower.

Are There Any Other Issues When Using Husqvarna Z248F?

Apart from the issues that are likely to come up when using the Husqvarna, some users might have found it quite irritating.

The best mowers cut grass evenly to ensure you get the look of your desires.

For one, the Husqvarna Z248F might initially give you an uneven cut if you are cutting very tall grass.

To get better cuts, trim the grass so that the mower can have an easier time giving you an even cut. The Z248F can only cut grass as tall as 4 inches.

Although the Husqvarna Z248F will give you smooth cuts on various types of grass, it isn’t that ideal for commercial grade mowing.

It works better for small areas and would struggle to replicate its best performance when you use it commercially.

If you insist on using it commercially, then it would only be suitable for small-scale businesses.

Another issue most people will face when using the Husqvarna is the tendency to miss the center stripe grass.

If that happens, try lowering the deck height and have the mower be closer to the ground. That would, however, expose it to the dangers of small rocks and twigs.

Finally, the Husqvarna Z248F is a zero-turn mower. Therefore, sometimes you might tear up your lawn as you mow.

It is, therefore, crucial for you to ensure you mow carefully to avoid damaging your lawn.

Is it Really Worth It?

After reading all the problems up there, you might have started wondering if this mower is worth it.

That’s expected. We would, however, like to inform you that this mower is good value for money.

It has a quality Kawasaki engine that doesn’t always need the choke to do a cold start. With its zero-turn transmission, you will have an easier time maneuvering on different surfaces.

If you ask anyone, that is usually one of the biggest issues with some other mowers. They typically are a little complicated to maneuver.

Not this one, though. If the above benefits haven’t changed your mind, perhaps its durability will.

We all want a machine that will withstand the test of time, don’t we?

Frequently Asked Questions (FAQs)

Is the Husqvarna Z248F a good mower?

Based on several reviews from the Z248F owners, this is a reliable and durable mower. And they are happy with it’s performance.

How many blades does a Husqvarna Z248F have?

Z248F has 3 blades.

How much oil does a Husqvarna Z248F take?

The fuel tank located at the side of the mower can take 3.5 gal (US) of oil.

Final Thoughts

We hope we have addressed all the Husqvarna Z248F problems that might have had you concerned. Most of the problems as usually mechanical and thus easier to diagnose.

If they get too complicated, you can always call Husqvarna customer care, and they will help you sort them. If not, you can get an expert to help you solve them.

About Author

3 thoughts on “Husqvarna Z248F Problems And Major Complaints Explained”

  1. I ordered a Z248 because it was advertised to have a strong WELDED DECK what I got was one with a flimsy stamped deck. How is this possiable? Factory falt or internet dealer falt?

  2. The lever that lifts the mowing deck of my Husqvarna Z248F is almost impossible for me to operate with one hand. When I looked into the slot where the lift-lever is located, there is a solitary coil spring that wrapped around the lift shaft. When lift pressure is applied to lift the deck, the spring compresses, thus making it hard to operate. There is only one spring in this location. What can I do to fix this problem?

  3. I bought a machine last year first week I used it the lift arm for the deck bent this was in May I ordered 2 receive one in September and one in February did not get to use the machine that year just started cutting this year and the lift arm is bent again very poor design the deck is too heavy for the flimsy lift arm only one spring I just ordered another spring see if that makes a difference dealer would not warranty the lift arm Very flimsy

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Scroll to Top
Scroll to Top