What impresses about a dirt devil vacuum cleaner is the little whirlwind that gets rid of dirt, and debris in a short time.
Also, this appliance is user-friendly and uses powerful suction and a superior brush to get rid of the most stubborn hairs.
Since it’s a workhorse, a lot of dirt may accumulate. This is exactly what you need when you have a dusty house. Unfortunately, most homeowners do not know how to take apart a dirt devil vacuum cleaner.
Fortunately, it’s a simple process that will only take a few hours. Let’s get started.
Taking Apart A Dir Devil Vacuum
Before we jump into the clean-up exercise, it’s important to understand what a dirt devil is and its key components.
The majority of households have a dirt devil which is a popular brand with vacuum cleaners and other cleaning products. Indeed, many customers from all corners of the world appreciate the importance of this appliance in keeping the surroundings clean.
Despite this, only a handful of users know how to take it apart or how to clean them. A Dirt devil is a small appliance, lightweight and portable.
It consists of an external battery, handle, canister, metal plate, and brush head.
Your dirt devil requires sufficient airflow for it to operate smoothly. Quite often, the canisters and the filters get clogged with dirt or hairs.
Because of this, these components canisters need regular cleaning and maintenance.
Most users empty the canister and fail to clean the entire device. Besides emptying the canister, you should clean the vacuum routinely by using the following step-by-step instructions.
- Gather The Cleaning Materials
The first thing to do before you proceed with the cleanup is to have your materials ready. These items are readily available around the home, and you don’t have to spend a lot of money on the clean-up exercise.
What you will need for the cleanup
- A dry microfiber cloth
- Dishwashing detergent
- Scissors
- Grout brush
- Unplug The Vacuum From An Electric Connection
The dirt devil power swerve disassembly is easy. However, your safety comes first and it’s important to work when the power is off. Begin by disconnecting the vacuum from the electric connection or socket.
Also, depending on the model you are using, remove the external battery or the power brick. Locate the battery on either side and pull it out. Keep it away in a safe location.
- Cover The Floor
After you’ve disconnected the power supply, the next step is to cover the floor area. Notably, taking apart a dirt devil vacuum can spew dirt everywhere on the floor, carpet, couch, and other surfaces.
If you live in an apartment, space may be limited and therefore, it’s important to cover your floor to protect it from dirt, hairs, and other debris. You can go the extra mile and cover your couch with a large sheet.
If your property has more space, you can clean the vacuum in an open location like the garage or the laundry. Here, we recommend a rug or PVC material to cover the floor since it’s easier to clean.
- Disconnect The Vacuum’s Handle
Now that your floor is ready, disconnect the handle from the vacuum. The handle is an important section of the dirt devil vacuum as it houses the canister and the dirt filter.
It may seem like an obvious thing, however, pay attention to the instructions to avoid damaging the handle. Lay the appliance on the floor so that the handle attachment is facing upwards.
Next, turn its knob in a clockwise direction and gently pull the handle. A dirt devil vacuum requires a lot of care when handling and therefore, ensure you must not force the knob as it can break.
- Unscrew The Sections
At this point, the handle and the battery are already apart. The next stage involves unscrewing the different sections of the handle. A screwdriver is an essential tool to have around the house.
Using the screwdriver, unscrew every screw from the handle. We suggest storing the screws in a safe container.
Keep the container away on a tabletop to avoid losing the screws. Pull the two sections of the handle to release them.
- Release The Canister
A canister has a dirt cup where all the dirt is stored. Press the release button on the canister to expose the dirt cup. With one hand holding the canister, pull the dirt filter.
Empty the dirt contents in a dustbin and wipe the inside with a dry microfiber cloth. After that, you can clean the dirt cup with water in a sink and mild detergent.
- Clean The Filter
Before you clean the filter, it’s vital to check whether the manufacturer’s instructions allow it to be washed with water. If not, you may need to replace it if the dirt clog fails to clear.
To clean a dirty filter, tap it on a hard surface for knocking off the dust. Use a trash can to prevent dirtying the area. Next, place the filter under a tap and allow warm water to flow over it.
Refrain from using detergents and cleaners unless the instructions allow. Next, keep the filter in an open place to dry overnight.
- Detach The Metal Plate
After you are done cleaning the dirt cup, you can now detach the metal from the brush head. Lay the dirt devil on a flat surface with the head facing the ceiling.
Unscrew both sides using a screwdriver and release the screws.
Here we suggest getting another container to store the screw to avoid mixing up with the handle screws. These will be necessary during the installation stage.
Since now the screws are loose, pull the vacuum’s metal plate from the brush bristles.
- Dismantle the brush head
After detaching the metal, now pull off the head and remove all the screws on the vacuum’s frame. Learn more about removing roller brushes from a vacuum if you have to. Keep them away for safekeeping.
Just like the other two sets, retain them in a different container to prevent mix-up. Pull away this part and keep it aside.
Cut any hairs and threads on the base plate; however, take care not to cut the bristles on the vacuum bar. Using a grout brush, remove dirt and other debris from the bar.
Wipe down the metal plate and with a dry cloth.
Finally, wipe the external part of the dirt devil vacuum with a dry microfiber cloth. Before you reattach the parts, keep them in an open place to dry for an overnight stay.
- Reattach The Parts And Test Your Dirt Devil Vacuum Cleaner
The next step is to reattach the parts. You can start with the metal bar, brush head, filter, canister, and finally the handle.
After you’ve put back everything together, plug it into the electricity and see whether it’s working. If it produces a funny sound, you can have a professional look at it. Now, watch this video to get a general idea.
A Few Notes On Dirt Devil Vacuum Cleaners
- Handle your dirt devil vacuum with care as it’s a sensitive appliance that can break apart.
- A dirt devil is easy to take down with the right tools. Try not to apply a lot of force as this can damage the appliance. Reattach the sections gently with the screws.
- Since we are discussing dirt devils, take it apart in an open place or cover the floor. Otherwise, your entire floor will be littered with dirt.
- A canister requires regular emptying as it may blow dusty air into your home. If you have pets at home, then you need to take apart your dirt devil regularly for a quick cleanup.
Conclusion
A dirt devil is a sensitive appliance and requires care when handling. If it’s acting up and is clogged with dirt is important to have it cleaned. Luckily it’s a simple procedure you can DIY at home.
Now that you know how to take apart a dirt devil vacuum cleaner, it’s important to have a regular maintenance program in place.