Tile Redi shower pans are very quick and easy to install as they are manufactured as one fully integrated piece. In addition, its built-in threshold and drains make it easier to install.
But still, there are some Tile Redi shower pan problems like water not draining out properly, pan not sticking to the base, and so on that people face every now and then.
I will be talking about those issues and suggest some solutions as well.
Common Problems With Tile Redi Shower Pan
Let’s have a brief look at those problems first:
- Not sticking to the base.
- Plenty of people find it hard to install.
- Water not draining out right.
- and so on.
Tile Redi is the current vogue for shower pans in modern households. As Tile Redi provides a flexible installation process with the promise of being leakproof, customers are more attracted to the product.
They assume it is very time-saving and easier than the same old-fashioned process of building up a shower pan manually by local plumbers.
But, there still remain some mishaps or mistakes in the process that brings you back to zero, and you have to start building your shower pans again.
Installing a whole new shower pan is not that cost-effective. That is why you should do your own research for buying a shower pan before having to do the math of re-installing it again.
So, let’s take a look into some of those complaints and problems:
- Shower Pan Not Installing Properly
Tile Redi usually comes with a handy, easy-to-follow manual book that explains the installation process. But sometimes, it is seen that the pan does not set properly to its base during installation.
This scenario has many explanations. The most anticipated guess would be taking the wrong measurements of the shower pan area.
Again, if you are renovating your shower area, you might not have furnished the base properly before installing the shower pan.
- Shower Pan Not Sticking to the Base
Anothercommon complaint with Tile Redi shower pans is that the adhesive used does not stick properly to the base.
The Tile Redi shower pans come with an epoxy adhesive to stick to the base properly.
But sometimes, when you try to seal the shower pan to the base or floor, the concrete does not stick to the bottom, creating bumpy areas in the shower area.
It even starts breaking the grout due to the concrete not sticking properly to the base. Watch this video to solve this problem.
- Water Not Draining Out Properly
Sometimes, when the shower pan is installed, it does not properly pitch to the drainage area or evenly on all sides.
The pre-pitched shower base may not perfect pitch to all sides, creating unusual angles in the floor.
This causes water to accumulate at the edge of the shower base, creating a pool of water.
These were some commonly reported problems faced by the customers using the Tile Redi shower pans.
Now, let’s go through some tips and tricks you can use to avoid these kinds of problems with your shower pans.
How to Avoid the Tile Redi Shower Pan Problems?
Whenever buying shower pans, you must do your research beforehand. Although it is the most used part of our shower and essential as well, we tend to pay less heed to our shower pans.
But if the base itself is not settled properly, you might face difficulties using your showers.
Tile Redi shower pans are very attractive. They come with a handy installation process and a variety of choices, including customization according to the buyer’s preferences and conveniences.
But some problems are inevitable. A few common issues with Tile Redi shower pans are addressed before.
Now, let’s dig deeper into the issues and try to find solutions for customers like you and us to avoid the issues in the future.
- Use the Correct Mortar for Installation
The easy-to-follow instructions that come with the Tile Redi shower pan kit cover every specification about using the mortar or concrete to install it.
Check if the mortar and the amount are adequate and perfect for the base in which you are installing your shower pan.
Porcelain mortars are considered the best ones to use, but you still need to recheck if it is the right one for your base or not.
Consulting a local plumber, in this case, would be wise. You may also check out the Redi Base mortar that comes with the kit, or you may buy your own.
Buying your own mortar seems wiser. As you can never be entirely sure about how your shower area would cope with the mortar being used.
- Pitch the Pan to the Drain Properly
As mentioned earlier, some unusual angles of the drains are seen as the shower pan is not pitched properly or evenly all over the shower area.
This causes water to clog inside the area. Now, to prevent clogging and pitch the pan properly to the drain on all sides, the curves of the tiles should be cut properly and evenly on all sides.
If you find it difficult to cut the curves in your tile, let a plumber assist you or buy some square drain plate from the market instead.
Tile Redi also provides a tileable drain cover called Redi Trench. You can also use that to pitch the pan properly on all sides of the drain area.
- Use the Right Adhesive to Stick Your Shower Pan
The Tile Redi shower pan is usually stuck to its base with a thinset. But it is not a good idea to use the provided thinset for tiling the shower pan.
Thinsets are very likely to leak outside the pan area, and it is not easy to clean them. That is why another alternative for epoxy can be epoxy mortars.
Epoxy mortar is the finest material to use for tiling a shower pan.
Usually, your Tile Redi shower pan should come with an adequate amount of epoxy to stick the base, but if you think you need more, it is always wise to order extra ones earlier.
Tile Redi also has RediProxy. Once you’ve laid down a mortar base, RediPoxy may be utilized as a tile adhesive.
Frequently Asked Questions (FAQs)
It means it’s ready to tile. Meaning, you can set their tiles directly onto the surface (leakproof).
Polyurethane is the main ingredient of tile Redi shower pans.
When intalled correctly (which is easy), yes, they are waterproof.
You can but you should not. You should use the epoxy that comes with the pans to make it completely leakproof and easy to clean.
Final Words
At the end of a busy, hectic day, when you come home, your body demands a good refreshing bath. A good bath can never be completed with a shower pan having a crack, not sticking to the base, or with broken gout.
So do your research properly before having the Tile Redi shower pan problems.Before falling into any problem with your shower pans, always double-check your things to do.
After all, “Prevention is better than cure.”
About Author
My tile shower pan installed in basement has a bout half inch of hole. What is the best way to patched?