John Deere 1025R, a Yanmar three-cylinder with a fast speed of 3200rpm, is a source of relief to most small-scale farmers.
However, we can’t afford to give a blind eye to the John Deere 1025R problems.
Most farmers are complaining of transmission problems, hydraulic problems, among others. So let’s dig deeper into the construction of the John Deere 1025R and lay it bare if it’s worth your money.
Stay with me to make a wise decision.
Common Problems of John Deere 1025R
Here is a list of common issues with 1025R:
- Hydraulic problems
- Transmission problems
- Brakes and steering problems
- Overheating engine
- Hard to start the engine
Even after solving some of the significant problems facing small-scale farmers, this compact machine is a topic of debate by most farmers.
In this section, we will look at some of the issues of this tool and give a tip to help overcome the problem.
Also, if you are in a dilemma if to purchase the device, we will help you come to a quick conclusion.
John Deere 1025R Hydraulic Problems
Most power machines have a hydraulic system that drives fluid which is the source of energy, and this tractor is no exceptional.
Unfortunately, though, its hydraulic system has not been the easiest to use. Here are some of its hydraulic system complaints and some troubleshooting techniques.
- Sluggish Operation
Some of the users observed that this machine’s operation speed decreases with time. The manufacturers suggested that it would be due to water in the hydraulic oil altering its density and its pressure.
The good news is that there is a corrective mechanism for this problem. You can quickly drain out the hydraulic system and fill it in with pure and correct oil type for hydraulic systems.
- Poor performance
The hydraulic system works with respect to the law of pressure. Thus if the pressure of the hydraulic fluid is altered then, it results in poor performance.
Fortunately, you can improve its performance by draining and filling the hydraulic fluid. Yet you can check on the hydraulic oil filters and replace them if need be.
John Deere 1025r Transmission Problems
Some people faced the same issue dealing with Z445 John Deere problems as well. Transmission problems can be quite adverse to the extent that the machine cannot move an inch even with the engine running.
The best news is that you don’t have to hire a mechanic, but you can perform a corrective measure all by yourself. Well, that sounds good.
The transmission problems can be as a result of;
- Transmission oil low – when the oil level is below the minimum level, it is low. That can be corrected by adding more oil.
- Transmission oil cold – for better oil movements, the transmission oil needs to be slightly warm. Thus, if it is chilly weather, wait for some minutes for the oil to warm up.
- Neutral shift lever position – the shift lever should be at a high or low range position. Thus, check if it is well-positioned.
John Deere 1025R Engine problems
Having a faulty engine implies having a useless machine. Why? An engine is the source of power in the John Deere 1025R tractor.
Consequently, a defective engine means no power, thus no functionality. Some of the engine problems are;
- It A Hard To Start The Engine
At times the engine can be pretty hard to start, or worse, it may fail to start. A wrong gearshift lever positioning can cause that, that is, on a neutral position.
To run the engine, always ensure that the gearshift lever is in the high or low range.
Further, stale or wrong oil type will not start your engine. That is because the stale or wrong oil type has poor viscosity, and thus its movements are not efficient.
Therefore, you should regularly refill the hydraulic oil with the correct hydraulic fluid.
- Overheating Engine
Extreme temperatures on the engine significantly affect the longevity of the machine.
In addition, an engine can overheat due to the accumulation of debris on radiator fins. Consequently, regular cleaning of the radiator fins is paramount.
Similarly, improper adjustment on the fan belt can cause engine overheating. So always have your fan belt tight and in place.
The best part is that you can purchase a coolant and use it to bring the engine to its room temperatures, or you can also reduce the engine speed to cool it.
Other Issues With John Deere 1025r Lawn Tractor
Apart from the above big issues, there are some smaller issues you need to be aware of:
John Deere 1025r Brakes And Steering Problems
Malfunctioned steering and brakes are pretty deadly. So strictly, you should check on them regularly.
Your brakes might be faulty if they take ages to respond. Luckily you can quickly fix them by repairing or replacing them.
Some of the causes of faulty steering are;
- Faulty oil filter
- Excessive play on the steering which can be repaired
- Improper tire inflation. Thus ensure that you inflate the tires correctly always.
Electrical System Problems
Problems with the electrical system are usually a result of a faulty battery. Either the battery is not charging or has corroded terminals resulting in high current resistance.
Thus, it is vital to ensure that;
- The battery connections are correct
- Regularly clean the terminal to prevent corrosions
- The electrical belt should be tight always
- Replace any defective battery
John Deere 1025R Design
Before we dive right into the problems of this machine, it would be wise to first look at its construction design and its unique features.
So what is John deere 1025R?
It is a farm machine, a tractor that has a 24.2hp diesel engine of tier 4 standards. As a result, it has lesser emissions and a fast speed of 3200 revolutions per minute.
Apart from that, it is a two-speed tool that facilitates quick change in direction and speed.
Yet, the unique feature of this tractor is its compactness. In fact, it is rated to be the most compact machine from the well renowned John Deere company that retains a higher ability and functionality.
Below are more details on the John Deere 1025R specifications;
|Engine power||24.2PS 23.9hp SAE J1995|
|Steering hydraulics||13.2L/min 3.5 GPM|
|Hitch Type||Limited category 1|
|Standard transmission||Hydrostatic-two range|
|Power take-off(PTO)||12.8kW 17.2hp|
|Bore and stroke||80 x 84mm 3.15 x3.31 in|
Is a John Deere 1025R worth it?
Having looked at the shortcomings of the john Deere 1025r tractor, you might be wondering if this machine is fit for you?
Well, relax and take a deep breath as you join me to determine if this tool is worth your money.
First, besides the problems of this tool, it has unique features and specifications such as compact design, fast transitions, fast speed, among many others.
On the other hand, this tool also has some challenges. However, it is good you note that the problems are not a result of mediocre construction. Honestly, the manufacturers have done an excellent job.
Let me explain something-
The problems accompanying this tool are typical and expected troubles while using a power tool. However, the good thing is that the troubleshooting process is quite simplified.
Even better, you can correct some of its issues all by yourself with no extra expense of hiring a mechanic.
So, having looked at both sides of the coin, both the merits and demerits of this tool, I would firmly agree that it is worth your money.
Frequently Asked Questions (FAQs)
The R from 1025R model indicates more whistles and bells.
In B range, it can go as fast as 9MPH, in A range, it can go as fast as 4.5 MPH.
It can lift up to 758 lbs.
1025R has 2 HP more than the 1023E lawn tractor.
If you are an enthusiastic farmer, you must have heard about the John Deere 1025r tractor.
Unfortunately, that’s not only due to its unique and powerful design but also may be due to its operation problems. For this reason, we have taken a closer look to help you make an informed decision.
Frankly, it has the most seamless, fast speed, and robust operations.
But, on the other hand, we have scrutinized some of its challenges and, a step further, given solutions to the John Deere 1025R problems.